Cab Handle
Is there any way to wire one 8 ohm speaker so that it is read as 4 ohms?
I have a 1x15 bass cab which can handle up to 600 watts. It is powered by a 550 watt at 4 ohms amplifier. Right now the amp only gives the cab 225 watts of power because it's reading the speaker in the cab as 8 ohms. I want to re wire it so the speaker is read at 4 ohms.
using a dummy load will not work as 1/2 the power will be lost as heat in the resistive load and the speaker will put out the same as it did.
8 ohms is 225 watts
4 ohms is 550
so two 8 ohms is parallel is still 225 a piece or 550 total, meaning if you use a dummy load your wasting 1/2 the power, use another 8 ohm speaker paralled at get more power.
The most recent Ebay auctions for Cab Handle are listed below. You can now search through the results and find great low prices on Cab Handle.
![]() |
![]() Cabinet Strap Handle for amplifier speaker cab US $5.95 |
![]() CREAM AMPLIFIER HANDLE FOR AMPEG MESA AMPS BOGNER HEADS CABS MORE US $14.95 |
![]() Cab Empty Wicker FrontVintageMake an Offer bluesbreaker 21000 OBO US $210.00 |
![]() Guitar Bass Amp Speaker Cab Strap Handle Hardware NEW US $14.95 |
![]() Metal Reinforced strap handle for Roland re 201 or speaker cab ampĀ US $9.99 |
![]() D2F Padded Cover for Fender SP 3100 Ext Cab 3 Handle US $105.95 |
![]() Large Contour Amp or Cab Strap Handle Black End Caps US $4.10 |
![]() BLACK AMPLIFIER HANDLE FOR AMPEG MESA AMPS BOGNER HEADS CABS MORE US $14.95 |
![]() Circa 1966 grey Marshall Strap Handle Angle and TALL straight 4x12 cab covers US $1,500.00 |
![]() Circa mid late 60s black Marshall Strap Handle TALL straight 4x12 cab cover US $450.00 |
![]() MARSHALL STYLE METAL RECESSED CAB HANDLE FITS NEW CAB US $18.95 |
![]() Gallien Krueger 410 Cab Side Handles w screws cabinet grips Metal Black used US $29.99 |
![]() BROWN AMPLIFIER HANDLE FOR AMPEG MESA AMPS BOGNER HEADS CABS MORE US $14.95 |
















